USB510W JTAG Emulator

More Views

USB510W JTAG Emulator

SKU: 12168

$1,500.00

DISCONTINUED

The USB510W JTAG Emulator model has been discontinued. The recommended replacement is the USB560v2 STM Emulator. You can also compare emulator models on the Blackhawk Web site comparison page.

Description

Details

The USB510W JTAG Emulator model has been discontinued. The recommended replacement is the USB560v2 STM Emulator. You can also compare emulator models on the Blackhawk Web site comparison page.

The Blackhawk USB510W is the first of its kind wireless JTAG emulator for Texas Instruments DSPs. The USB510W has an embedded 802.11 wireless transceiver and requires no hard connection to a PC in order to debug using Code Composer Studio. The major benefit of this capability is to completely isolate the PC from the target therefore eliminating the chance for high-voltage damage of test components. This protects the target board, PC and emulator from voltage spikes and the absence of a common ground plane.

Configuration of the USB510W is accomplished via the USB port in the same fashion as setting up a wireless router. Or, the USB510W can be used wirelessly right out of the box using the default settings suitable for most wifi networks. And of course, the USB510W can also be used for debugging via the high-speed USB port.

The integrated wireless transceiver chip of the USB510W is capable of supporting the following wireless protocols and speeds:
802.11n: 6.5, 13, 19.5, 26, 39, 52, 58.5, & 65 Mbps
802.11ag: 6, 9, 12, 18, 24, 36, 48, & 54 Mbps
802.11b: 1, 2, 5.5, & 11 Mbps
Blackhawk is a recognized leader in providing advanced JTAG Emulators for Texas Instruments DSPs and the first company to develop a USB JTAG Emulator for TI TMS320™ DSPs. Our XDS510™-class emulators & controllers provide a full range of features and benefits with support for a wide-range of TI DSPs. Blackhawk XDS510-class JTAG Emulators & Controllers are also compatible with Code Composer Studio™ Flash-burner utility.

View Blackhawk USB510W JTAG Emulator Product Page

Download Datasheet

In The Box
Contents

These are the items included with the product.


  1. USB510W Emulator Pod with USB (bus-powered) and WiFi Host Interfaces
  2. cTI-20 to TI-14 Pin Converter
  3. 5v DC USB Power Supply, Multi-Plug (90~264 VAC)
  4. Wall Plugs (4 - US, EU, UK, AU)
  5. USB 2.0 Cable
  6. Installation Disc
  7. Quick Start Guide
  8. Product Warranty and Registration Information Card
Related Products

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.